Router Support World is an Independent Online Technical and Software Support Provider.
We are not associated to any Brands. All images and brand names if used are for reference purpose only.

Call +1-844-659-0555 – How to Configure TP-Link N router as a wireless Access Point?

This article will disclose how to utilize your TP-Link N switch as a passageway. The primary switch will be associated with the TP-Link N switch through LAN port (as observed underneath). The WAN port isn’t utilized for this setup.

Principle Router Access Point

Stage 1

Associate your PC to a subsequent LAN port on your TP-Link N switch utilizing an Ethernet cable.* Login to the TP-Link web interface through the IP address recorded on the mark on the base of your TP-Link N switch (see underneath connection for help):

How would I sign into the online utility of a TP-Link switch

Note: Though conceivable, it isn’t prescribed to endeavor this procedure over Wi-Fi

Stage 2

Go to Network>LAN as an afterthought menu and change the LAN IP address of your TP-Link N switch to an IP address on a similar portion of the fundamental switch. This IP address ought to be outside the principle switch’s DHCP extend.

Model: in the event that the DHCP of your primary switch is –, at that point you can set the IP of the TP-Link N switch to 192.168.2.X (X ought to be outside your fundamental switch’s DHCP run), like

Note: After changing the LAN IP address a reboot will be required and you should sign into the TP-Link N switch with the new IP address.

Stage 3

Go to Wireless>Wireless Settings and arrange the SSID (Network name)which can be the equivalent or not quite the same as the primary router’s. Select Save.

Stage 4

Go to Wireless>Wireless Security and arrange the remote security. WPA/WPA2-Personal is prescribed as the most secure alternative. When arranged, click Save.

Note: If utilizing a double band switch, rehash this procedure for the 5GHz band too.

Stage 5

Go to DHCP>DHCP Settings and select Disable the DHCP Server. Select Save.

Stage 6

Go to System Tools>Reboot and select Reboot to reboot the gadget.

Stage 7

Utilize an Ethernet link to interface the fundamental switch to your TP-Link N switch through their LAN ports (any LAN ports might be utilized). All other LAN ports on your TP-Link N switch will currently concede gadgets Internet get to. On the other hand, any Wi-Fi gadget would now be able to get to the Internet through your TP-Link N switch by utilizing the SSID and Password set up in the above advances.